Visit our sister company, HR Surveyors, for precision engineering surveys.

Menu

What's in Your Concrete Slab? GPR Scanning Before You Drill or Cut

GPR scanning can help locate reinforcement and embedded services before you drill, core or saw-cut concrete. Confirm the scan coverage, unresolved features and further checks needed for the proposed work.

What Can GPR Detect Inside a Concrete Slab?

Ground Penetrating Radar (GPR) transmits radio pulses into concrete and reads the reflections. Different materials — metal, plastic, voids — reflect differently, giving the operator a real-time cross-section of what's inside.

Scan depth depends on the concrete, reinforcement and equipment. Dense reinforcement can obscure deeper features. Confirm the required depth with the technician and record any areas the scan cannot resolve before drilling or cutting.

Features GPR may detect:

  • ✓ Reinforcing bar (rebar) and mesh
  • ✓ Post-tension cables and tendons
  • ✓ Electrical conduits and cables
  • ✓ Plumbing and hydraulic pipes
  • ✓ Voids and delamination zones
  • ✓ Embedded anchors and fixings
  • ✓ Drainage pipes cast within or below slab
Concrete scanning documentation and GPR survey report

When Is a Concrete Scan Required?

Any time a drill, saw, or core barrel is going into concrete of unknown internal layout, a GPR scan should be the first step. The cost of a scan is a fraction of the cost of cutting a post-tension cable or live conduit.

  • ✓ Core drilling for columns, poles, or mechanical penetrations
  • ✓ Saw cutting for expansion joints or slab removal
  • ✓ Anchor bolt installation into existing concrete
  • ✓ Renovation penetrations — HVAC, plumbing, electrical
  • ✓ Demolition of concrete elements near live services
  • ✓ Any drilling into slabs of unknown age or origin

How Concrete Scanning Works — 3 Steps

From booking to marked slab — a fast, non-invasive process that keeps your project moving.

01

Site Briefing

We review your drilling or cutting plan, identify target locations, and confirm slab access before mobilising to site.

02

GPR Scanning

Our technician scans the slab using calibrated GPR equipment in a systematic grid pattern over all nominated areas.

03

Marking & Report

Detected features are marked directly on the slab surface and documented in a written report with depth estimates — ready for your trades.

What You Receive

Documentation your trades can act on immediately.

Slab Markings

Detected features marked directly on the concrete surface using paint or chalk, clearly showing position, orientation, and spacing.

Depth Estimates

Cover depth and invert level estimates for rebar, cables, and conduits at each drilling or cutting location.

Written Report

Documented scan findings with annotated site sketches, feature descriptions, scan limitations and areas requiring further checks before drilling.

Concrete Scanning FAQs

Is GPR concrete scanning safe? +

GPR uses radio waves, which are non-ionising radiation. It scans concrete without drilling or cutting the slab. Operators must follow the equipment instructions and site safety controls. A scan does not certify that a drilling or cutting location is safe: the technician must report detection limits, and the contractor must confirm the work method and any further checks before proceeding.

How accurate is GPR depth measurement in concrete? +

GPR provides depth estimates for detected features. Concrete mix, moisture, reinforcement density and equipment settings affect the result. Ask the technician to state the scan coverage, depth assumptions and unresolved areas in the report. Confirm the accuracy needed for your proposed penetration before work starts.

Can GPR scan post-tension concrete slabs? +

GPR can help locate post-tension tendons, but dense reinforcement or limited access can obscure features. Cutting a tendon can cause serious injury or structural damage. Give the technician the slab drawings and proposed penetration details, and refer unresolved findings to the responsible engineer before cutting or coring.

How long does a concrete scanning survey take? +

Scan time depends on area size, access and slab complexity. Send your proposed drilling or cutting locations, area dimensions and available drawings so the team can estimate the scope and time. Scanning a location does not provide clearance to drill or cut.

ARPANSA explains radiofrequency radiation. Confirm equipment-specific precautions and the proposed cutting or drilling controls with your technician and site team.

Part of HR Surveyors — concrete scanning data can be integrated with utility survey plans for complete subsurface documentation.

Ready for Precision Utility Mapping?

Expert utility locating services with BYDA certified precision.

Serving projects across Australia with advanced subsurface mapping solutions.