Visit our sister company, HR Surveyors, for precision engineering surveys.

Menu

Drain Keeps Blocking? Investigate With CCTV Inspection

A drain that blocks repeatedly may have an obstruction, a structural fault or another operating issue. CCTV can help investigate the visible interior of accessible sections. The report should explain what was inspected, what was observed and what remains unresolved.

Common Causes of Recurring Drain Blockages

If your drain has been cleared multiple times and keeps blocking at the same point, you're treating the symptom. These are possible causes to investigate; camera access, flow and visibility affect which features can be assessed.

1

Root intrusion

Tree roots enter through pipe joints, grow to fill the pipe bore, and catch debris. Clearing removes the roots temporarily — they return unless the entry point is addressed.

2

Displaced or open joints

Ground movement, settlement, or age cause pipe joints to separate. The offset creates a step that catches solids, builds up, and eventually blocks.

3

Pipe collapse or deformation

Older clay, concrete, or plastic pipes can crack, flatten, or collapse under load. No amount of clearing fixes a structurally failed pipe.

4

Incorrect pipe fall

A drain with insufficient gradient retains water and sediment. Solids accumulate until the pipe blocks. This is a design issue, not a maintenance one.

5

Foreign object or build-up

Wipes, grease, construction debris or other deposits may be visible in the inspected section, subject to access and visibility.

Use Camera Evidence to Plan the Next Investigation

Excavating to find a blocked drain without knowing where the problem is means opening multiple locations — expensive, disruptive, and often inconclusive if the structural fault isn't found on the first attempt.

CCTV records visible internal condition and the camera's travel through the inspected pipe. Footage alone does not establish the pipe's external position or depth. If a repair requires excavation, arrange suitable locating and survey evidence, follow owner instructions and have the responsible contractor determine the work controls.

For councils, body corporates, and commercial property managers, CCTV condition reports also serve as an asset management record — documenting the state of drainage infrastructure at a point in time. Where you also need to locate and map the position of drainage pipes and pits within a broader network, our stormwater and drainage locating service provides georeferenced mapping as a separate, complementary workflow to condition assessment.

CCTV drain inspection equipment used for blocked drain investigation in Melbourne

What Our CCTV Inspection Covers

Push-rod and robotic crawler cameras access pipes via existing chambers or rodding points — no excavation required.

✓ Stormwater drains and culverts
✓ Sewer mains and service laterals
✓ Drainage sumps and pits
✓ Pre-purchase drainage due diligence
✓ Construction dilapidation baseline surveys
✓ Council asset condition audits
✓ Defect investigation and fault location
✓ Pre-relining condition assessment
✓ Insurance and dispute documentation

What You Receive

Agree the footage, reporting and any separate survey requirements with the receiving team before the inspection.

HD Video Footage

Full-length internal video of the inspected pipe, timestamped and annotated — ready to review, share, or archive.

Condition Report

Structured written report with defect notation — root intrusion, structural damage, joint condition, blockage location, and repair recommendations.

Location & Depth Data

Position and level information requires an agreed locating or survey scope. State the observation source, reference points and limitations; CCTV alone does not establish excavation coordinates.

Need the full CCTV inspection service overview?

View CCTV Inspections service page →

Blocked Drain Investigation FAQs

Do I need a plumber before booking a CCTV inspection? +

Not necessarily. If the drain is blocked and hasn't been cleared, a CCTV camera may not be able to pass the blockage — in which case a plumber should clear the line first. If the drain clears and then re-blocks, CCTV may help investigate visible internal faults. Access, flow and visibility can limit the result; further testing or other specialist advice may be needed. Contact our team and we can advise based on your situation.

What pipe sizes and materials can you inspect? +

Our equipment handles a wide range of pipe diameters and materials including PVC, concrete, clay, cast iron, and HDPE. Suitable pipe sizes range from 75mm up to large culvert systems. Contact our team with your pipe size and access point details to confirm suitability.

What if the blockage is caused by tree roots? +

Root intrusion is one of the most common causes of recurring blockages. CCTV may show visible root intrusion and associated internal defects in the inspected section. Obscured or inaccessible areas remain unresolved. A suitably qualified contractor should assess the findings and other evidence before recommending a repair.

Do you service Geelong as well as Melbourne? +

Yes. HR Utilities operates from offices in both Huntingdale (Melbourne) and Geelong. We provide CCTV pipe and drain inspection across metropolitan Melbourne, Geelong, the Bellarine Peninsula, and the Surf Coast. Contact our team to confirm availability for your location.

Ready for Precision Utility Mapping?

Expert utility locating services with BYDA certified precision.

Serving projects across Australia with advanced subsurface mapping solutions.